!#/bin/bash sudo apt-get update sudo apt-get upgrade sudo apt-get -y install python3 sudo apt-get -y install python3-rpi.gpio sudo apt-get -y install python3-smbus sudo apt-get -y install libcblas-dev sudo apt-get -y install libgtkmm-3.0-1 sudo apt-get -y install libnotify4 sudo dphys-swapfile swapoff #sudo nano /etc/dphys-swapfile # DOING: edit CONF_SWAPSIZE=2000 sudo sed -i 's/CONF_SWAPSIZE=100/CONF_SWAPSIZE=2048/g' /etc/dphys-swapfile sudo dphys-swapfile swapon sudo apt-get -y install python3-pip sudo apt-get -y install python3-pil sudo apt-get -y install python3-numpy wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz tar zxvf bcm2835-1.71.tar.gz cd bcm2835-1.71/ sudo ./configure && sudo make && sudo make check && sudo make install cd .. #Open the Raspberry Pi terminal and run the following command sudo apt-get install wiringpi #For Raspberry Pi systems after May 2019 (earlier than before, you may not need to execute), you may need to upgrade: wget https://project-downloads.drogon.net/wiringpi-latest.deb sudo dpkg -i wiringpi-latest.deb gpio -v # Run gpio -v and version 2.52 will appear. If it does not appear, the installation is wrong #Bullseye branch system use the following command: #git clone https://github.com/WiringPi/WiringPi #cd WiringPiaaaaaa #./build #gpio -v # Run gpio -v and version 2.60 will appear. If it does not appear, it means that there is an installation error sudo pip3 install --upgrade pip pip3 install numpy dlib pip3 install Pillow pip3 install ws1in44lcd #pip3 install opencv-python pip3 install RPi.GPIO pip3 install spidev pip3 install picamera sudo apt-get -y purge wolfram-engine sudo apt-get -y purge libreoffice* sudo apt-get -y clean sudo apt-get -y autoremove echo "OpenCV installation by learnOpenCV.com" cvVersion="masrer" rm -rf opencv/build rm -rf opencv_contrib/build mkdir installation mkdir installation/OpenCV-"$cvVersion" cwd=$(pwd) sudo apt-get -y update sudo apt-get -y upgrade sudo apt-get -y remove x264 libx264-dev sudo apt-get -y install build-essential checkinstall cmake pkg-config yasm sudo apt-get -y install git gfortran sudo apt-get -y install libjpeg8-dev libjasper-dev libpng12-dev sudo apt-get -y install libtiff5-dev sudo apt-get -y install libtiff-dev sudo apt-get -y install libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev sudo apt-get -y install libxine2-dev libv4l-dev cd /usr/include/linux sudo ln -s -f ../libv4l1-videodev.h videodev.h cd $cwd sudo apt-get -y install libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev sudo apt-get -y install libgtk2.0-dev libtbb-dev qt5-default sudo apt-get -y install libatlas-base-dev sudo apt-get -y install libmp3lame-dev libtheora-dev sudo apt-get -y install libvorbis-dev libxvidcore-dev libx264-dev sudo apt-get -y install libopencore-amrnb-dev libopencore-amrwb-dev sudo apt-get -y install libavresample-dev sudo apt-get -y install x264 v4l-utils sudo apt-get -y install libprotobuf-dev protobuf-compiler sudo apt-get -y install libgoogle-glog-dev libgflags-dev sudo apt-get -y install libgphoto2-dev libeigen3-dev libhdf5-dev doxygen sudo apt-get -y install python3-dev python3-pip sudo -H pip3 install -U pip numpy sudo apt-get -y install python3-testresources cd $cwd python3 -m venv OpenCV-"$cvVersion"-py3 echo "# Virtual Environment Wrapper" >> ~/.bashrc echo "alias workoncv-$cvVersion=\"source $cwd/OpenCV-$cvVersion-py3/bin/activate\"" >> ~/.bashrc sudo sed -i 's/CONF_SWAPSIZE=100/CONF_SWAPSIZE=1024/g' /etc/dphys-swapfile sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start pip install numpy dlib git clone https://github.com/opencv/opencv.git cd opencv git checkout $cvVersion cd .. git clone https://github.com/opencv/opencv_contrib.git cd opencv_contrib git checkout $cvVersion cd .. cd opencv mkdir build cd build cmake -D CMAKE_BUILD_TYPE=RELEASE \ -D CMAKE_INSTALL_PREFIX=$cwd/installation/OpenCV-"$cvVersion" \ -D INSTALL_C_EXAMPLES=ON \ -D INSTALL_PYTHON_EXAMPLES=ON \ -D WITH_TBB=ON \ -D WITH_V4L=ON \ -D OPENCV_PYTHON3_INSTALL_PATH=$cwd/OpenCV-$cvVersion-py3/lib/python3.5/site-packages \ -D WITH_QT=ON \ -D WITH_OPENGL=ON \ -D OPENCV_EXTRA_MODULES_PATH=../../opencv_contrib/modules \ -D BUILD_EXAMPLES=ON .. make -j$(nproc) make install sudo sed -i 's/CONF_SWAPSIZE=1024/CONF_SWAPSIZE=100/g' /etc/dphys-swapfile sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start echo "sudo modprobe bcm2835-v4l2" >> ~/.profile echo echo "--------------------------" echo "- Installation Complete! -" echo "--------------------------" echo # Zusatz Packete # Für DeAuth WLan pip install scapy